Detailed Painted 3D "Following" Resin LED Eyes
These are detailed hand painted eyes done in a style of your choosing. However, we need you to provide a link to a reference so we know how to paint them.
These are sold in sets of 2 to make a pair. An LED is embedded in the top part of the eye, so that when you install eyelids it's covered. LEDs are all attached to the battery packs, wired and ready for installation. All battery packs take AAA batteries and have an on/off switch, but you can opt to have a toggle switch installed, so you also have an external on/off.
First LED color and Second LED color refer to the two LEDs installed. If you have them both the same, each eye will have the same color lit. If you choose one color for the first led and one color for the second LED, each eye will light up a different color. (Example: First LED color is white, Second LED color is blue, so one eye will have a white led, and the other eye will have a blue LED.)
If you want either Purple or Pink LEDs, they can ONLY be combined with other purple and pink LEDs. You can't have a single pack both a mixture of purple or pink with anything else.
Standard measurements are: Between the eyes is 10-12", and between the eyes and battery pack is 18-20"3cm 3D = 1.5cm deep
3.8cm 3D = 2cm Deep
1.75" 3D = .875” Deep
2" 3D = 1" deep
If you choose the apoxie option, instead of normal heat shrink around the diodes, we'll cover that area with apoxie sculpt, which is an air drying clay. It will be hard as a rock, so will keep the diodes from breaking. However, they will be a little more difficult to install, since you won't be able to bend that area. Please keep that in mind!
To give these eyes a following look, add eyelids. Once they have eyelids, they'll follow.