Simplistic Painted 3D "Following" Resin LED Eyes
Normal option is metallic color all the way around the pupil evenly, and the reptile style has the veining sort of pattern.
These are sold in sets of 2 to make a pair. An LED is embedded in the top part of the eye, so that when you install eyelids it's covered. LEDs are all attached to the battery packs, wired and ready for installation. All battery packs take AAA batteries and have an on/off switch, but you can opt to have a toggle switch installed, so you also have an external on/off.
If you want either Purple or Pink LEDs, they can ONLY be combined with other purple and pink LEDs. You can't have a single pack both a mixture of purple or pink with anything else.
Standard measurements are: Between the eyes is 10-12", and between the eyes and battery pack is 18-20"3cm 3D = 1.5cm deep
3.8cm 3D = 2cm Deep
1.75" 3D = .875” Deep
2" 3D = 1" deep
If you choose the apoxie option, instead of normal heat shrink around the diodes, we'll cover that area with apoxie sculpt, which is an air drying clay. It will be hard as a rock, so will keep the diodes from breaking. However, they will be a little more difficult to install, since you won't be able to bend that area. Please keep that in mind!
To give these eyes a following look, add eyelids. Once they have eyelids, they'll follow.